What To Do If The Font Is Deformed During Laser Marking Work

If you encounter the problem of font deformation during laser marking work, you can try the following methods to solve it:

Adjust the driven wheel. If the driven wheel on the left side of the X-axis is worn, you can try to replace it with a new driven wheel to restore it to normal.
Tighten the screws. If the fastening screws between the X-axis motor and the pulley are loose, you can tighten the screws to solve the problem.
Replace the motor. If the X-axis motor fails, consider replacing the motor to maintain normal marking work.
Adjust tension. If the belt tension on the left and right sides of the Y-axis direction is inconsistent, you can adjust the hexagonal screw at the rear end of the Y-axis until the tension is consistent to ensure the consistency of the marking font.
Product Positioning. If the product positioning is unstable (not placed smoothly or too loosely), or the product and machine are touched during the marking process, the product position can be readjusted to ensure its stability.
If the problem of font deformation still exists after trying the above methods, it is recommended to contact professional technicians for further inspection and repair.

Hot tags: fly laser, laser marker, fiber laser marking, fiber laser marking machine, fiber laser marking machine price, fiber laser marking machine 20w, fiber laser marking machine 30w, 50w fiber laser engraving machine, fiber laser engraving machine for sale, fiber laser engraving machine price, fiber laser engraver machine for metal