What Should I Do If The Level Of The Laser Marking Machine Table Is Not Accurate?

If the table level of the laser marking machine is not accurate, you can try the following solutions:

1. Use a level: Use a level to check the levelness of the workbench. If the workbench is not level, it can be achieved by adjusting the stand or base of the workbench.
2. Adjust the levelness of the workbench: After the workbench is adjusted to the horizontal position, it is necessary to adjust the levelness. This can be achieved by adjusting the feet of the device. Adjust the height of the feet until the workbench is perfectly level.
3. Check the equipment components: If the workbench still cannot reach the accurate level, it may be caused by damaged or loose equipment components. It is necessary to check whether the support, base and foot pad of the equipment are fastened, and whether there are damaged parts that need to be replaced.
4. Recalibration: If none of the above methods can solve the problem, it may be caused by a wrong calibration of the device. At this point, recalibration is required to ensure the accuracy of the device.
It should be noted that different laser marking machines may have different adjustment methods and steps. It is recommended to read the equipment manual in detail before using the equipment to understand the adjustment methods and steps. If the problem persists, it is recommended to contact professional technicians for maintenance and debugging.

Hot tags: fly laser, laser etch, laser etching, laser etching machine, fiber laser etching machine, fiber laser etching machine price, 20w fiber laser etching machine, 30w fiber laser etching machine, fiber laser etching machine for metal, metal fiber laser etching machine