What Should I Do If The Laser Marking Machine Suddenly Stops Emitting Light During The Marking Process?

Laser marking machine is a high-precision equipment commonly used in industrial production. During the marking process, if the luminous light suddenly stops, it may have a considerable impact on production. But don't panic, here are some solutions.

First of all, you should check whether the device is powered on normally and whether the power plug is loose. Occasionally, a device's power plug can become loose due to vibration or jolting of the device, causing an electrical circuit to fail. Therefore, it is necessary to ensure that the equipment joints are firm and reliable.

Second, check to see if the laser is overheating. Since the laser marking machine needs to continuously emit high-temperature laser beams when it is working, the laser will generate high temperature. If the temperature of the laser exceeds the set standard, the laser will automatically stop working to avoid damage to the equipment. At this time, you can refer to the operation manual of the equipment, perform cooling treatment, wait for a few minutes, and then mark again.

Finally, check that the lenses are clean. In the optical path, if there is dirt on the lens, it will affect the transmission effect of light and affect the normal operation of the laser marking machine. Therefore, it is necessary to clean the lens in time to keep the equipment clean.

In short, when the laser marking machine stops emitting light, you should deal with it calmly, check the cause of the failure one by one, find out the problem and repair it in time. Only in this way can we ensure the smooth progress of production.

Hot tags: fly laser, laser marking machine, fiber laser marking machine, fiber laser marking machine for sale, fiber laser marking machine quality, fiber laser marking machine 20w, 30w fiber laser marking machine, 50w fiber laser marking machine, 100w fiber laser marking machine