What Should I Do If The Graphics Of The Laser Marking Machine Are Overlapped Or Misplaced?

When using a laser marking machine, sometimes graphics overlap or misalignment occurs. This may be due to the following reasons:

1. The setting of the laser marking machine is incorrect. When setting the parameters of the laser marking machine, it is necessary to carefully check whether the set marking speed, power, etc. meet the requirements.

2. The fixing of the marking part is unstable. If the position and angle of the marking part are incorrect or unstable, the laser marking machine will not be able to mark correctly.

3. The optical path of the laser marking machine is unstable. If the optical path of the laser marking machine is unstable, such as the wrong lens position or the influence of impurities such as dust, it will also cause overlapping or misalignment of graphics.

For these problems, the following measures can be taken to solve:

1. Check the setting parameters carefully to make sure the setting is correct.

2. Ensure that the marking part is fixed and stable, and the position and angle of the marking part can be adjusted.

3. Regularly clean the lens and optical path of the laser marking machine to ensure smooth optical path.

In short, the laser marking machine is a very efficient and convenient marking equipment. As long as we take every detail seriously, we can avoid the problem of overlapping or misalignment of graphics and ensure the quality and efficiency of marking.

Hot tags: fly laser, laser marking, laser marking machine, fiber laser marking machine, fiber laser engraving machine, fiber laser engraving machine price, 20w fiber laser engraving machine price, 50w fiber laser engraving machine price, fiber laser engraving machine for metal, metal fiber laser engraving machine for sale