What Should I Do If The Beam Shape Of The Laser Marking Machine Is Unstable?

If the beam shape of the laser marking machine is unstable, you can try the following methods to solve it:

1. Check whether the laser settings are correct and make correct settings according to the laser instruction manual.

2. Check whether the light path is clear. If some dirt or dust is attached to the lens or lens, it needs to be cleaned.

3. Check whether the workbench of the laser marking machine is stable. If there is jitter or movement, the position of the workbench needs to be adjusted.

4. Check whether the power supply of the laser marking machine is stable to prevent voltage or current fluctuations from affecting the working effect of the laser marking machine.

5. Sometimes the laser beam shape becomes unstable due to changes in temperature or environment. In this case, ventilation equipment can be set up near the laser to stabilize the temperature and environment.

In short, as long as you use the laser marking machine correctly and set up and operate it according to the requirements of the laser instruction manual, you can avoid the occurrence of unstable beam shape.

Hot tags: fly laser, laser engraver, fiber laser engraver, fiber laser engraver machine, fiber laser engraver machine 20w, 30w fiber laser engraver machine, 50w fiber laser engraver machine, fiber laser engraver machine for metal, fiber laser engraver machine 50w, metal fiber laser engraver machine, metal fiber laser engraving machine, metal fiber laser engraving machine 20w, 30w metal fiber laser engraving machine