Jewelry Laser Welding Machine 80w 100w 200w

Fly laser Jewelry machine 60W 40J Mini Portable Jewelry Laser Welding Machine With Color CCD 10X Microscope for gold

Introduction:

FL-S150 jewelry laser welding machine, mainly used in gold and silver jewelry repair holes and spot welding sand holes. Laser spot welding is one of the important aspects of laser material processing technology applications, spot welding process is a heat conduction type, that is, laser radiation heating the surface of the work piece, surface heat transfer to the internal diffusion, through the control of laser pulses width, energy, peak power and repetition frequency make the work piece melt to form a specific molten pool. Because of its unique advantages, it has been successfully used in gold and silver jewelry processing and welding of micro and small parts.

Features:

Use ceramic chamber with long life span and high energy efficiency;

Stable performance with longer life span. Degree of instability is less than 3%;

Double-regulation interface, support blind regulation with high work efficiency;

Small focal spot with strong focal energy. Excellent penetration performance will help weld on various golds, silvers and stainless-steel materials;

Adopt long-life ceramic condensing cavity with high energy efficiency conversion ratio;

Small focus spot and stronger focus energy, the penetration depth is good for the welding of all kinds of gold, silver and stainless steel;

Adjustable output waveform multi-section superposition output;

Unique appearance design, smaller in size and small in space.

Applications:

Spot welding laser welding machine is widely used in eyeglasses, jewelry, electronic components, medical equipment, welding and other industries welding, seal welding, welding and so on.

Installation requirements:

Please install this equipment in a solid horizontal and non-inclined place.

The input voltage of the equipment is single phase AC220V ±10% 50 HZ capacity above 40A ±10.

The equipment must be grounded.

Please install this equipment in the surrounding temperature 5~40 oC, humidity below 85%, no drastic temperature change.

In addition, please avoid using:

Places prone to dew;

Places with many vibrations and shocks;

Places in high frequency sources of interference;

Places with large amounts of garbage, dust and oil;

The parts and walls of the equipment should be kept above 60cm for ventilation and heat dissipation.

Cooling water (distilled water or drinking pure water) is required for the new machine. Add cooling water into the cooling system tank to the water level line, then, cover the water temperature set to 25 ℃ (winter) -28 ℃ (summer);

For new machines and machines that have just replaced laser tubes or cooling water, turn on the air switch and wait for the water cooler to run for five minutes, allowing the water cooling system to discharge all blisters. And check whether the pressure of the water chiller hydraulic meter is normal if shut down several times to restart the exhaust air.

Specifications：

Sample picture

Hot tags: jewelry laser welding machine  80w 100w 200w, ccd spot welding machine for glasses, laser welding machine for jewelry, desktop jewelry laser welding machine, China, wholesale, buy, suppliers, manufacturers, factory, price, discount, for sale