fiber laser marking machine price

fiber laser marking machine price

Handheld Portable Fiber Laser Marking MachinePrinciple of fiber laser marking machine: The fiber laser marking machine uses a laser beam to mark permanent marks on the surface of various materials. Th

Features
Share:
  • Product Description

    Handheld Portable Fiber Laser Marking Machine

    Principle of fiber laser marking machine:

    The fiber laser marking machine uses a laser beam to mark permanent marks on the surface of various materials. The effect of marking is to expose the deep material through the evaporation of the surface material, or to "engrave" traces through the chemical and physical changes of the surface material caused by light energy, or to burn off part of the material through light energy to reveal the required etching. Patterns, texts, barcodes and other graphics. The so-called fiber laser marking machine refers to the use of fiber lasers. The fiber laser has small size (no water cooling device, air cooling) and good light quality (fundamental mode). ), maintenance-free.

    Application

    Industry:

    · Suitable for electronic components, integrated circuits, electrical appliances, communication products, sanitary ware, tools, accessories, knives, glasses, clocks, jewelry, auto parts, luggage buckles, kitchen utensils, stainless steel products and other industry products, etc.For artistic, clear and permanent identification mark.

    Material:

    · Suitable for engineering plastics, electroplating materials, coating materials, rubber, epoxy resin, ceramic, ABS, PVC, PES, copper, titanium, steel and other materials surface for artistic, clear and permanent identification mark.

    Specifications:

    Laser power: 10W/20W/30W/50W/100w

    Laser wavelength: 1065nm

    Laser beam qualityM2: <1.3

    Laser repetition rate:20KHz--80KHz

    Marking range: Standard 150*150mm Others depend on the model (can be customized according to requirements)

    Engraving speed: 8000mm/s

    Engraving depth: 0.001-0.4mm (depending on material)

    Minimum line width: 0.03mm

    Min character: 0.4mm

    Repeat accuracy: ±0.002mm

    Machine power: 500W

    Power requirement: 220V±10%/50Hz/unidirectional

    Laser module life:>10000h

    Cooling method: Built-in air cooling

    Operating ambient temperature: 15°-35°


    Our Service

    1. Warranty for 1 years.

    2. Maintenance for the whole life.

    3. We will provide the consumable parts at an agency price.

    4. 24 hours online service, free technical support.

    5. Machine has been adjusted before delivery, operation disk is included in the delivery. If there are any other questions, pls kindly tell me.

    6. We have a USB flash drive (guide video and machine manual), operation, and machine use and maintenance.

    7. We have U-drive (Guiding Videos and instruction) which is used for software installation, operation, and machine using and maintenance.

    1651803061(1).jpg1651803050(1).jpg1651803026(1).jpg


Recommend

Recommend

Hot News