Portable Handheld Fiber Laser Marking Machine for Big Size Material Plastic Metal Etching Engraving Machine Price----Fly laser Products
Portable Handheld Fiber Laser Marking Machine
Applicable to various materials: steel, aluminum, silver, gold, silicon. Applicable to various industries: electronic components industry, medical equipment industry, glasses and clock industry, IC card industry, jewelry industry
Introduction:
Fiber laser marking machine adopt international high quality fiber laser, marking effect is perfect. It can mark all kinds of fine and complex patterns on the surface of the product, which is suitable for Ultra-fine marking. This type can be equipped with a variety of power laser source, the marking speed is fast and efficient. The machine has long service life, stable laser output power and high reliability. It can work continuously under harsh working conditions, and the laser is 100,000 hours free of maintenance.
Laser machine advantages:
1. The beam quality of the LFP series fiber laser marking machine is much better than that of the traditional flash lamp pumped and semiconductor pumped solid laser marking machines. It outputs the fundamental mode (TEM00) and has a small divergence angle. Especially suitable for high precision and fine marking.
2. Small size, easy to carry, and portable
3. The weight and floor space of LFP series fiber laser marking machine are 1/10 and 1/4 of that of flashlamp pumped solid-state laser marking machine respectively, which saves space and is easy to handle. It can adapt to the requirements of frequent change of processing locations and realize the portability of products.
4. The laser output power is stable and the equipment is highly reliable
Applications:
It is widely used in the fields of electronic components, hardware tools, electrical products, consumer goods for daily use, sensors, auto parts, 3C electronics, handicrafts, precision instruments, gift ornaments, medical instruments, high and low voltage electrical appliances, sanitary ware industry, battery industry, IT industry, etc.
Specifications:
Model | FL-LFP20 | ||
Type | Handheld | ||
Computer | Not includes PC | ||
Average output power | 10W - 50W | ||
Central emission wavelength | 1060-1070 nm, Q switch operation Output power adjustment range is 10% -100% | ||
Polarization | random | ||
Nominal average output power | 10W - 30W | ||
Central emission wavelength | 1060-1070 nm ,Q-switched operation Output power adjustment range 10%-100% | ||
Transmit bandwidth(FWHM) | <10 nm | ||
Long-term average power instability | <5% | ||
Pulse width(FWHM) | 100 ns | ||
Laser switching ON time | 180 μsec | ||
Laser switching OFF time | 180 μsec | ||
Pulse Repetition Rate* kHz | 20-80 kHz | ||
Energy per pulse (PRR = 20 kHz) | 0.95 mJ | ||
Typical beam quality, M2 | <1.8 | ||
Output fiber delivery length | 3m | ||
Operating voltage | 220V | ||
Max. Power consumption | 600W | ||
Net Dimensions | 70*20*50cm | ||
Net Weight | 44 kgs | ||
Gross Weight | 60 kgs | ||
Laser system | |||
Scanning Speed | 0-7000mm/s | ||
Marking Speed | 0-8000mm/s | ||
Marking size | 110mm×110mm (F-theta 160) | ||
Spot size | ≤ 40 micron (F-theta 160) | ||
Cooling unit | Air cooled | ||
Pilot laser | 650nm diode laser, visible red light for marking guide | ||
Continuous working time | ≥16h | ||
Humidity | 45~85% (no condensation) | ||
Operating temperature | 0~40℃ | ||
Control units | Laser Mark (English Version) |
Sample picture
MORE
MORE
MORE
MORE
MORE
MORE
MORE
MORE
MORE
MORE