The 800 series handheld fiber laser marking system is a high-performance laser marking system developed and produced by Mango's professional team based on years of experience in laser development, production and service. The laser marking machine consists of two parts: the laser marking head and the control box. This control box is a highly integrated industrial computer system, mainly used for laser and galvanometer marking information input, editing and rapid and precise control.
产品亮点The 800 Series handheld fiber laser marking machines are developed and designed for fully automatic marking of packaging materials and products using laser radiation.
The 800 Series handheld laser marking machine may only be operated by specially trained personnel who are familiar with and comply with the specifications in this manual.
The 800 series handheld fiber laser marking system is a high-performance laser marking system developed and produced by Mango's professional team based on years of experience in laser development, production and service.
The laser marking machine consists of two parts: the laser marking head and the control box.
This control box is a highly integrated industrial computer system, mainly used for laser and galvanometer marking information input, editing and rapid and precise control.
2.1.1 Chassis structure description
The laser marking head is connected to the controller and cannot be disassembled. The laser marking head contains a galvanometer and a field lens. The beam is deflected by the galvanometer and focused by the field lens to the surface of the object to be marked with an appropriate focal length.
The 800 handheld marking machine control system is a highly integrated laser source and industrial computer, including a fiber laser source, a built-in marking control system, a 7-inch LCD touch screen.
The 800 handheld laser marking machine uses an emergency stop switch to stop the laser in an emergency.
When the switch is pressed, the PWM control signal input to the laser will be terminated, and the laser will have no output at this time. When the switch is pulled high, the emergency stop switch is turned off, the PWM signal will be turned on again, and the laser will be turned on.
When the emergency stop switch is pressed, only the control signal terminal is interrupted, and the software is still running. There may be laser output when restarting before the marking is completed. Therefore, be sure to operate the emergency stop switch according to the following procedures to ensure the safety of users and operators. :
1. Press the emergency stop switch and the laser is interrupted;
2. In the operation screen, click Stop Marking to close the marking process;
3. Only when the marking process is stopped can the emergency stop switch be turned on again or the marking head be moved.
The 800 Series II generation handheld laser marking machine uses an easily removable battery to facilitate user replacement of the battery life. Since the battery needs to be taken out during charging, unnecessary risks caused by users using the machine during charging are avoided. Specific steps are as follows:
1. Open the battery compartment door switch;
2. Remove the battery;
3. Use the battery adapter to charge the battery or replace the battery.
2.1.6 Reset shutdown operation
The battery version of the 800 series handheld laser marking machine provides a reset switch (power button), which can completely stop the battery from providing power to avoid excessive battery discharge and affecting battery life. Press and hold the power button for 3 seconds until the buzzer sounds and the power button light turns off.
MORE
MORE
MORE
MORE
MORE
MORE
MORE
MORE
MORE
MORE